Model DPS-800GB A
This board is intended for use with HP brand power supplies model number 'DPS-800GB A'. The supply can be
turned on and off via the JP1 header, either manually using the supplied jumper, or via an attached controller device
such as a Raspberry Pi, Beagleboard, Arduino, or Microcontroller
12 screw terminal contacts, 6 for +12 volts and 6 for ground, that provide a way to attach
the main load. Each individual contact is rated for up to 16 Amps of current and combined up to the maximum rating of
the attached power supply. Each terminal can accommodate solid or stranded wire from 12 – 24 AWG in size. Be sure
to use the appropriate gauge wire for your electric load.